Tankless Water Heater Installation in Maryland

Upgrading to a tankless water heater is a smart and efficient solution. Traditional water heaters use energy to continually heat a full tank of water, but tankless systems turn on only when you need hot water. This saves energy and helps lower your utility bills.

These wall-mounted units are also compact, freeing up valuable space in your home. And because you aren’t limited by tank size, you get virtually endless hot water.

Working with professional tankless water heater installers in Maryland will ensure your system is safely connected and runs without trouble.

Schedule Your Installation Online

or give us a call: (888) 243-HOME

7 Reasons To Upgrade to a Tankless Water Heater

If your old water heater is nearing the end of its useful life and you’re tired of high energy bills, installing a tankless water heater is an energy-efficient option that offers several benefits. These include:

• Energy efficiency: Because you only use energy when you turn on your hot water tap, you cut out the waste of keeping a tank of water hot at all times.
• Continuous hot water: The system heats water as you use it, so you have an endless supply of hot water for showers, laundry and dishes.
• No risk of leaks: Tanks can rust and corrode, but with a tankless system, there’s little risk of a damaging leak.
• Saves space: Units are compact and wall-mounted, so you no longer need to devote floor space to a water tank. Tankless water heaters work in closets, utility rooms and basements.
• Self-diagnostic system: Today’s units incorporate diagnostic technologies that detect concerns before they become problems, and keep your system operating efficiently.
• Precise temperature control: Digital controls allow you to fine-tune your water temperature for comfort and safety.
• Higher life expectancy: If you hire professional tankless water heater installers and keep your unit well-maintained, you can expect it to last 20 years or more.

How Much Does Tankless Water Heater Installation Cost in Maryland?

Whether you choose an electric or gas-powered tankless water heater, installation costs in Maryland depend on several factors. These include:

• Unit type: Installing a gas tankless water heater is more expensive than an electric tankless water heater. However, gas ones may be less expensive to operate in the long term, depending on gas prices in your area.
• Size: You may need a small heater that just serves your shower. Or you may need a large-capacity one that serves your kitchen sink, dishwasher and washing machine. Bigger, whole-home units require a more complex installation and have a higher installation cost.
• Venting and gas line upgrades: Installing a tankless water heater may require additional work, like adding vents, putting in new or larger gas lines or making electrical upgrades, all of which add to the costs.
• Permitting requirements: Maryland state and local codes require installation permits and fees that you need to include in your budget.

Make the most of potential savings by using money-saving coupons.

Why Choose Constellation Home for Water Heater Installation in Maryland?

Constellation Home’s team of certified, licensed professionals will show up on time, in uniform, ready to do the job right the first time. Whether you are looking for improved energy efficiency or enhanced curb appeal, you can trust us to provide:

• Free, No-Obligation In-Home Estimate
• Superior Energy-Saving Products
• Customized Solutions
• Professional Installation

Schedule Your Installation Online

or give us a call: (888) 243-HOME

Constellation Home’s Tankless Water Heater Installation Reviews

“I appreciate the same day service and being able to have a prompt next day delivery and set up of a new hot water heater scheduled. Being without hot water is not easy!”

– Gary, Sykesville, MD

We Proudly Serve Baltimore and the Surrounding Areas

• Anne Arundel County
• Baltimore County
• Baltimore City
• Carroll County
• Cecil County
• Frederick County
• Harford County
• Howard County
• Montgomery County
• Prince George’s County

FAQs About Installing a Tankless Water Heater

Can I replace my regular water heater with a tankless water heater?

Yes, in most cases, you can replace your regular tank water heater with a tankless option. People choose tankless water heater installations for the energy savings, space efficiency and ability to enjoy endless hot water.

Because you heat water as and when you need it, you don’t waste energy keeping a large tank of water hot all day and night. You can also mount it on the wall, freeing up valuable space in your home.

You may need to make modifications to the physical location of the unit, including gas or electrical connections and plumbing links.

Hiring professional tankless water heater installers ensures everything is done right and is up to code for safe and efficient operation.

What size tankless water heater should I get?

Right-sizing your tankless water heater depends on how much water you typically use at one time. Estimate your needs based on the gallons per minute (GPM) flow rate of every water fixture in your home. For example, if you shower while running your dishwasher and washing machine at the same time, add up the GPM of each.

Some water fixtures label their flow rate. If you don’t know the flow rate, you can estimate it by holding a bucket under a running faucet for one minute. The number of gallons in the bucket at the end of that minute is the GPM.

For more information about choosing the right water heater, see the Constellation Home Water Heater Installations Buying Guide, or request a free water heater installation estimate. Constellation Home can help you choose the right size and type of tankless water heater for your home.

Do you need a professional to install a tankless water heater?

In most areas of Maryland, installing a tankless heater by yourself isn’t practical.

Professional tankless water heater installers are best equipped to deal with the complexities of installation necessary for safety, efficiency and performance. They can also handle the time-consuming permitting process.

In addition to ensuring your unit is calibrated correctly and runs efficiently, a professional will make sure your installation meets building codes and passes inspections.

This helps you avoid leaks, venting problems, safety hazards and installation mistakes that affect your unit’s operation and potentially void its warranty.

How long does it take to install a tankless water heater?

Installation of a tankless water heater takes 4–8 hours.

A standard replacement can go relatively quickly. Switching from a traditional tank-style heater may require additional time-consuming work. Upgrading your gas line, adding venting or installing electrical connections to ensure operability can make it a day-long project.

Other factors that can add complexity and time to the process include:

• The type of unit
• How accessible the installation area is
• Whether the job requires plumbing or structural adjustments

Your professional installer can evaluate your situation, tell you what’s required and give you a detailed estimate of how long it will take.

What maintenance is required after installation?

Professional tankless water heater installers will get you off to a solid start, but to keep your heater running efficiently for years, it’s important to invest in regular maintenance.

Most manufacturers recommend you:

• Flush the system once a year to remove mineral buildup, particularly if your water is hard.
• Regularly clean the air and water filters to ensure smooth operation and extend the life of your unit.
• Regularly check the venting system and connections to make sure they’re free of leaks and corrosion.

Constellation Home professionals can make sure your tankless water heater stays in top operating condition.

Our licensed technicians, trained to care for all major brands, can clean and maintain your system to prevent problems and make repairs before you experience a costly failure. We’re here to make sure you enjoy reliable, energy-efficient hot water for years.